In any mode
Hold TRACK to activate the following shortcuts:
To change the BPM decimal, turn while pressing it.
Hold 2ND + BPM and turn the data knob to change the tempo, which will apply only when you release 2ND .
Hold 2ND and press < or > to double or divide the BPM in a flash.
Once an encoder is assigned, press it to display its set value.
In FX manager, Assign, DISP or Settings, press BPM to exit and return to the current mode.
Hold 2ND and press LIVE to enable/disable the metronome.
Hold LIVE and rotate to change the type of the 8 smartpads.
Hold STEP + velocity and rotate to change the keypad and smartpads velocity. You can also press ASSIGN to enable the ENCODER STEP EDIT feature, in order to set the velocity with the touchpad X axis.
Hold 2ND and press rec to activate a hard recording.
When the player is stopped and you press rec , Pyramid is waiting for a press on play . Once you press a countdown is launched. After one bar of countdown, recording starts and continues until the end of the track loop, at which point recording then stops and the loop continues to play as normal
When smartpads = CHORD, 2ND + rotating will jump to the very next major/minor tonality. Add complexity by pressing and rotating .
When smartpads = SCALE, 2ND + rotating will select the root note of the scale.
2ND + play activate the HOLD/RELATCH mode.
Press 2ND + delete to delete only notes + CC automations + FX automations of the current track.
Hold STEP and turn to change the Stepmode.
Hold 2ND and rotate to scroll the note list or the CC list faster.
Pre-listen to the selected note by pressing . Pressing < or > while holding allows you to jump octaves for a quicker note navigation. You can also press a key while holding to straight select the note number.
In stepmode NOTE , you can display the parameters of a step. Hold velocity and press a filled step to display (and even edit) the step velocity. Same behaviour for length and width. You can also display and edit several steps: hold velocity (or length or width) and press the first step together with the last step of the row .
Double tap a step-by-step pad to add a low velocity note in order to create accents quickly.
Hold velocity and slide the touchpad from left to right to quickly set the velocity, the CC value or the FX value.
Hold < or > to quickly navigate pages.
Press 2ND and hold < or > to quickly rotate the track (shift all notes one step left or right).
Press rec to switch to MONO EDITION, to have a global view of which of the 16 steps are filled with notes. If you press a filled step, it will remove all notes in this step, whatever the selected note is.
In stepmode NOTE and CHORD , hold a step (or a row of steps) and rotate to transpose it. Hold rec and rotate to transpose the track notes.
In stepmode CC MESSAGES and EFFECTS , hold a step (or a row of steps) and rotate to increase/decrease its value. Hold rec and rotate to transpose the whole automation.
In stepmode CC MESSAGES and EFFECTS , hold rec and slide the touchpad to draw an automation.
Press ASSIGN to enable the ENCODER STEP EDIT feature, in order to assign direclty the 5 encoders and the touchpad to shortcuts.
In stepmode NOTE or CC MESSAGES , press STEP to go to the nearest note or CC automation. Press STEP again to go to the next nearest note or CC automation.
In stepmode NOTE or CC MESSAGES , press 2ND + STEP to activate the filter, in order to scroll only through programmed notes or CC messages. Press 2ND + STEP again to quit the filter.
Press 2ND + DISP to enable/disable the player tracking.
Hold 2ND and select a track to mute/unmute it instantly.
Hold midi channel and press + rotate to quickly select the midi output of the track.
Hold length and press + rotate to set the bar level with step precision.
Hold time signature and rotate to change the time signature's upper number on the current track.
Pess rec in order to don't save the sequence mute states (rec led will be OFF). If you mute or unmute a track, the sequence will not save the mute states.
In DISP view, rotate to scroll the track banks (TR01A > TR07A, TR08A > TR16A, TR01B > TR07B, ...)
FX manager mode
With the effect manager activated, you can still play or add notes in LIVE and STEP mode, mute/unmute tracks in TRACK mode, and even launch sequences in SEQ mode.
Rotating while pressing 2ND allows you change the position of the selected effect.
In LIVE mode, when you are editing an effect with the 5 encoders , press rec to record directly the effect parameters automations.
In the main EFFECT MANAGER window:
● Press encoder 1 to enter the slot 1 effect.
● Press encoder 2 to enter the slot 2 effect.
● Press encoder 3 to enter the slot 3 effect.
● Press encoder 4 to enter the slot 4 effect.
● Press encoder 2ND + 1 to on/off the slot 1 effect.
● Press encoder 2ND + 2 to on/off the slot 2 effect.
● Press encoder 2ND + 3 to on/off the slot 3 effect.
● Press encoder 2ND + 4 to on/off the slot 4 effect.
Hold 2ND and rotate to scroll the CC list faster.
Hold 2ND and rotate to move the cursor vertically in the SAVE AS... edition display.
In the LOAD project list, press 2ND + delete to remove a project definitively from the SD card (note: the backup project is not removed).