Fast firmware update
Updating Rample:
- put the micro SD inside the SD adapter and insert it in your computer
- drag the "rample.bin" file into the micro SD card (do not change the file name)
- insert the SD card in Rample
- power on Rample while pressing/holding the encoder and wait a few seconds
- please verify the new version number (displayed in the SETTINGS > INFO menu: 3 10)
- ⚠️ Beta firmware: for testing purposes only. Keep a copy of your SD card before updating.
Download rampleOS Beta 3.1.0 BETA A
Every bug reports & suggestions must be sent here: squarp.net/contact
rampleOS Beta 3.1.0 BETA A
November 2, 2026

New actions
- Hold a voice button and click the encoder to open the LAYERS of that voice.
- In LAYERS, turn the encoder to hear each layer while you scroll (MANUAL mode). In the other modes, turning the encoder opens the LAYER MODE choice: click to confirm.
- Press LISTEN to leave LAYERS.
- Hold ASSIGN and confirm SETTINGS > RESET to reset only the effects, and keep everything else.
- Remove the SD card and put it back without turning Rample off: the kit reloads in about 1 second.
- KIT SELECT goes back to play mode after 5 seconds without a click.
- SETTINGS > VELOCITY = DRIVE: MIDI velocity controls both the LEVEL and the DRIVE of the voice.
- SETTINGS > VELOCITY = BIT now uses both bitcrusher algorithms across the velocity range.
- SETTINGS > VELOCITY is now set to LEVEL by default (it was OFF in 3.00): after a reset, Rample responds to MIDI velocity.
- Samples looped for hours no longer get damaged on the SD card. Nothing to set.
- Faster SD card reading.
- WAV files exported from Logic and Pro Tools now play correctly.
- Rample could freeze at startup with a MIDI cable plugged in.
- An SD card that stops responding no longer freezes Rample.
- Kit changes sent over MIDI no longer conflict with the encoder.
- Releasing LISTEN while holding ASSIGN no longer cancels ASSIGN.


